Ergo In Demand, Inc.
•
Support line 800-888-6024
•
www.ergoindemand.com
Install Standoff Fixtures.
Unscrew standoff head and insert provided screw through standoff
’s main body. Also use
provided metal washer
C
between wall and Standoff. Using a Phillips screwdriver, secure
standoff to the wall already installed anchor. Make sure you tight top Glassboard standoffs
while allowing some liberty to the bottom ones. This is to allow installers shift and align
standoff glassbords when mounting. Once all four standoffs are installed and board has
already fit perfectly, then proceed to hang the Glassboa
rd. (Don’t forget to secure bottom
standoffs too).
Fix the Glass Whiteboard
Carefully lift the Glass whiteboard so that the four mounting standoffs are aligned with
Glassboard holes. This is best done with two people. Carefully screw each standoff head
through Glassboard to anchors. Make sure you use provided nylon washers
B
to cushion
glass from both sides.. Be careful not to scratch the back of the glass. When you have all four
threaded bolts through the glass, screw them until they are firmly resting against the glass.
Oncecompleted, you are ready to start using Glassboard. It is a good idea to make sure
anchors are not becoming loose. If so repeat steps.
