Ergo In Demand, Inc.
•
Support line 800-888-6024
•
www.ergoindemand.com
Where to install it?
Even though it is obvious please take into consideration the following:
Select the wall where you will install the Glassboard onto.
Decide what height is going to be most convenient based on functionality and
room distribution. While doing this, consider how Glassboard will reflect light to
avoid excess ghosting and shadows.
Measurements.
For dry wall installations, we provide special
Self-Dr illing Dr ywall Anchor s
D
. This anchor
as its name implies uses itself to cr eate a hole as you scr ew it into the dr y wall. W hen
measur ing and deciding Glassboar d location, make sur e anchor s ar e not on to p of a
constr uction stud (this ver t ical device is made of metal or wood ensur ing wall str engt h sit ting
behind the dr ywall). To avoid this pr oblem you could use a Stud finder device, or use a thin
nail
To avoid handling Glassboard for measurements purposes, you could take a piece of
cardboard and cut it exactly as a template. If done so, make sure you mark exactly the
four holes on the cardboard. Then position the cardboard on the wall in the position you
have decided to mount Glass whiteboard. Using a bubble level, ensure the cardboard
template is level, and carefully using a nail mark drywall holes (anchors). Make sure you
mark the middle of each circle onto the wall. If you have measured correctly, these should
be the points at which you should drill the holes for the wall anchors.
Check Level and Measurements
Check your measurements and cardboard level one more time. Once you are ready, proceed
to anchors installation.
Anchors Installation. Drill the fixing holes
Install each self drilling
anchor onto the wall. Make sure you don’t over tight them maintaining
the arrow pointing up on the head of each self drilling anchor. This guarantees proper
functionality of them when securing screws and standoff fixtures to the wall.
