Glamox DT S5.1, Руководство пользователя

Страница: 1 / 20

OK OK
Press and a er the screen turns off, press and hold again un l you see “00” on the screen a er every shown segment.
-
+ Turn on (“On”) or off (“oF”) the adap ve start by using the and bu ons. This func on reaches the temperature set by
the user at a specific me. For example, if you want the temperature at 9 o'clock to be 22°C, the heater will determine when
it has to start hea ng so that it reaches 22°C at the desired me.
-
+
Select “On” or “oF” by pressing or . This func on is turned off by default.
The func on of an open window detects if a window is open (i.e., it detects a rapid change in temperature in a short period of
me). A er the heater detects an open window, the hea ng is automa cally turned off and changed to an -freezing mode by
maintaining a temperature of 7°C and „AF“ is displayed. A er the window is closed, i.e., when the temperature in the area
increases, the heater automa cally turns the previous program on or maintains a permanent constant temperature.
Select the desired “reduced” temperature by pressing + and
-
. By pressing
OK
, you will enter the se ng menu.
-
OK
+
Select the desired comfort temperature by pressing and . By pressing , you will enter the se ng menu.
OK
OK
P1 will no fy you that you are going to adjust the user program. Confirm this by pressing . Select which day(s) you are going to
adjust by using the and bu ons: 7d – 7 days, 5d – 5 business days, 2d – weekend, d1 – Monday, d2 – Tuesday,
d3 – Wednesday, d4 – Thursday, d5 – Friday, d6 – Saturday, d7 – Sunday, and confirm your selec on by pressing . Use the
and bu ons to change the hours from 00 to 23 and select the desired temperature for every hour: a decreased
temperature (green light above is on), a “comfort” temperature (green light above is on). A er pressing , you will
return to the selec on list of the desired day for further programming or quit the se ng menu by pressing for 3 seconds.
If you wish to ini ate a weekly program, see chapter “Program menu”. The last value used on the screen will be a ributed to
the “comfort” temperature before the start of the programming.
< <
-
OK
OK
<
<
<
< +
Descrip on of func on Op ons
td
Pr
Co
Se ng the me of the heater
Set the day of the week by pressing : 1 – Monday; 2 – Tuesday, etc., and save by pressing .
Set the hour: 0-23 and save by pressing . Set the minutes: 0-59 and save by pressing .
You will not be able to adjust other se ngs un l you set the me and day of the week.
-
OK
OK OK
Adjustment of weekly hea ng program
Adjustment of “comfort” temperature
Se ng a lower temperature rd
OP
C
AS
rE
Func on detec ng an open window
Calibra on of the temperature
The ambient temperature is displayed on the screen. If it does not correspond to the thermometer readings, then it may be
calibrated. For example, the heater shows that the ambient temperature is 20°C; meanwhile, the other thermometer shows
that it is 22°C. Then you can calibrate it and set the temperature which you have measured using the other thermometer.
Adap ve start
Reset the heater to factory default se ngs
+
< <
OK
OK
SETTING MENU
By pressing and holding bu on for 3 seconds, the selec on menu can be turned on or off. Use the bu ons to scroll through the list and
use the bu on to select the necessary se ng or confirm y
our selec on:
GENERAL OVERVIEW OF THE THERMOSTAT DISPLAY
LIGHT INDICATORS:
1. Display showing temperature and control parameters.
2. The red light is on when the heater is opera ng.
3. Green light showing a reduced temperature. It is on
when the heater is opera ng in accordance with the
chosen program, maintaining the reduced temperature.
temperature. It is on when the heater is opera ng in
dance with the chosen the
FUNCTIONS OF THE BUTTONS:
– Increases temperature, me or
other parameter.
(See Addi onal func ons).
4.
Green light indicator showing the “comfort”
– Selec on bu on meaning “less”
.
– Selec on bu on meaning “more”.
+
accor program, maintaining
“comfort” temperature. (See Addi onal func ons).
<
<
-
– Decreases temperature, me or
other parameter.
OK – Confirma on of selec on.
HOW TO OPERATE
The appliance is switched on or off by pressing the bu on on the right side of the heater. When the heater is switched on for the
first me, it begins opera ng at the default “comfort” temperature of 22°C; meanwhile, the blinking screen will show that a clock
me has not yet been set (See Se ng menu). The heater will maintain the temperature displayed on the screen if the user does not
select the desired program from the Program menu. You can create your own weekly hea ng program (P1) or you can use the
exis ng standard programs “Office” (P2) or “Home” (P3). The weekly programs determine when it will maintain the comfort
temperature (22°C) and when it will maintain the reduced temperature, which saves energy (17°C).
2018-11-1 9 art.no.: 62083
4
DT
S5.1
OK
1
3 4 2