4
4
Installation
1
Installing the faucet assembly
CAUTION:
Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Place the faucet (A) through the mounting
holes in the sink.
□
Secure the faucet (A) to the sink using the
washer (G) and nut (H) provided. Securely
tighten the screws (I) on the nut (H).
2
Installing the faucet handles
□
Remove the preassembled nuts (E) and washers
(D) from the hot and cold faucet handles (B and C).
□
Insert the hot faucet handle (B) to the left of the
spout and cold faucet handle (C) to the right of
the spout.
NOTE:
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Loosen the screws (F) on the nuts (E) until the
ends of the screws (F) a
the nuts (E).
□
Attach the faucet handles (B and C) underneath
the sink using the washers (D) and nuts (E).
Securely tighten the screws (F) on the nuts (E).
□
Remove the preassembled nut (H) and
washer (G) from the new faucet (A).
□
Loosen the screws (I) on the nut (H) until the
ends of the screws (I) a
of the nut (H).
A
2
2
2
B
C
G
A
D
3
D
3
1
F
E
1
1
F
E
1
E
F
5
4
H
I
3
5
H
I
E
F
E
F
