Specifications
GL-SP30 Outlook
User Manual
GL-SP30
1. The “Warranty Period” is two (2) years. We will warrant free repair or
replacement services if the product fails or becomes defective during normal
use within the prescribed warrantee period. Please send back the product to
our company or contact your local distributors for further directions.
2. Do not change or tamper with any internal electric circuits or add in any wires
or cables for any reason.
3. Do not change the mechanical design, circuit specifications, or components;
do not add any other devices as this may cause the product to short circuit or
may create other unforeseen risks.
4. Keep the lamp set in a dry environment in order to avoid any electricity
leakage.
5. To avoid electrical shocks and possible malfunction, please do not insert
objects of any nature into the LED product.
6. For further information, please contact us.
CAUTION
CAUTION
CLASS 2 LED LIGHT
DO NOT STARE INTO THE BEAM
GL-SP30
100V-240V~ 50-60Hz 38W IP66
1. Before installation,
please turn off the
power switch for the
existing bulb.
4. Screw the LED fixture tight
onto a wall or a stand and
adjust the angle in
accordance with individual
needs.
5. Please plug the
unit into an
appropriate power
socket and turn the
power on. If the
lamp does not
work, please
repeat steps 1-4
until it does work.
Installation process
Please get professional installation personnel to set up the fixture.
Optical
Mechanical and Dimension
Electrical
Temperature Condition
Model No.
CCT (Typical)
GL-SP30-WW
(Warm White)
GL-SP30-CW
(Cool White)
Luminous Flux (lm)
Typical Luminous Efficacy
CRI (Ra)
Beam Angle
Net. Weight
Power Factor
Cover
3000 K
6000 K
1,200 lm
1,700 lm
32 lm / W
45 lm / W
> 80
> 75
30° / 60° (Optional)
Outline Dim.
313 × 223 × 92 (mm)
38 W
> 0.95 for 115V AC; > 0.85 for 230V AC
3.5 (Kgs)
-20 °C
-
+40 °C
-40 °C
-
+85 °C
Clear
Typical Power consumption
Input Voltage
Operating Temperature
Storage Temperature
100 – 240V AC
2. Please make sure that the
specifications of the power
connector and the output
voltage are compatible to
the LED fixture used.
Thanks for your choice of LED
SP30 series products. Please
ensure that you install and use the
product according to the below
directions to enable the correct
implementation and normal
functioning of the LED product.
Should you not follow these
directions, you will not be
compensated in accordance with
the warrantee. We will not take
any responsibility from the
improper use and implementation
of the product, and for any
associated damage caused by
such irresponsible and negligent
actions.
92.0 mm
LED GL-SP30
IP66
223.0 mm
313.0 mm
(L) Brown
(N) Blue
Green / Yellow
3. At the rear side of the LED fixture,
please connect the Live (L) and
Neutral (N) terminal are used for
connecting to power output. Please
follow the standard process to
connect them accordingly and do
insulation on both terminal
respectively.