Clarius
®
PLUS IP
IR
WL
•
Dual Core LED™ Technology
•
Interchangeable Lens Diffuser Technology
Description
A complete range in infra-red and white light illuminators for
CCTV, the visible and Invisible range feature state of the art
technology and installation friendly design.
• Energy efficient, low voltage operation for quick and easy
installation
• Dual Core LED™
technology with advanced electronic
control circuitry deliver improved thermal management,
long life and low cost of ownership.
• CleanLITE
®
Self cleaning lens coating technology
• Semi covert, covert and visible white light versions.
• Built in photo cell
• Easy integration with day/night cameras with relay contacts
indicating if the built in photo cell has activated the
illuminator
• Remote telemetry input
• Easy access to power and photo cell adjust
• Pressure equalisation vent prevents thermal expansion and
pressure cycling
• Interchangeable lens diffuser technology
Specification
Electronics
High efficiency surface mount high
power LEDs with advanced current
limited integral control circuitry
Beam Angles
10
°
, 20
°
, 30
°
, 60
°
, 80
°
& 95
°
Lens/Beam Pattern
The illuminator should be matched to
the scene and the camera lens focal
length
Wavelength
850nm,940nm and visible white light
Expected Life
10 years
Consumption
Clarius IM / Clarius VM
25W
Input Voltage
PoE+ (IEEE802.3at)
Operating Temp
-50
°
to 50
°
(-58
°
to 122
°
F)
Environmental
IP66. Suitable for indoor and outdoor use
Construction
Robust high quality aluminium
extrusion
Front Window
Polycarbonate high transmittance
protection (vandal-proof) with
CleanLITE
®
technology
Dimensions
Clarius IM / Clarius VM 114 x 110 x 78mm
Weight
Clarius IM / Clarius VM 1.05kg (2.3lbs)
Power Cable
1m. With IP68 connector
Mount
Black power coated stainless steel wall
mount. Adjustable via M6 Allen Key
(included)
Installation
Note:
•
Only to be installed outside of arms reach
•
Installation should be done by skilled personnel or under supervision
of such personnel
•
The illuminator is PoE+.
•
Only to be installed in restricted Access Areas
•
Terminal block not included. Installation may require advice from a
qualified person
Optimum results are achieved by setting up at night and viewing the
results on a monitor.
1. Attach the illuminator mount to pan/tilt unit, wall or camera housing.
Using stainless steel fixings suitable for the relevant application.
2. Connect the lamp to a suitable (SELV) power supply.
3. Commission the mains supply, camera and monitoring equipment.
4. Select the diffuser angle sheet required from the Clarius box
(if required). To insert the required diffuser sheet, insert the tool
included in the slot at the bottom of the cover and prise upwards
slowly. Repeat at opposite end and carefully remove cover. Finally
firmly clip the lens cover back into place.
5. Adjust the pan angle of the illuminator to match the camera field of
view.
6. Adjust the vertical alignment by loosening the side bolts (one on
each side of the main body) to maximise the results.
7. Tilt the lamp downwards until the rear part if the required field of
view is saturated with light, as viewed on the monitor.
8. SLOWLY and GRADUALLY tilt the lamp upwards until the for part of
the required field of view is illuminated correctly on the monitor.
Unit 2 Birch Business Park, Whittle Lane, Heywood, Lancashire, OL10 2SX
www.gjd.co.uk
+44 (0) 1706 363 998
Clarius
®
LED Illuminators
Infrared & White Light LED Illuminators
RISK
GROUP 2
CAUTION
IR emitted
from this
product
