9
EN
EN
USER MANUAL
BAP
Press the
key to select the sample size from 10, 20, 50, 100, 200, 500 y 1000.
SAMPLING
Put on some samples with a sample size the same as the current displaying
one. Then press the
key and the displayed value starts flickering. Seve-
ral seconds later, the display shows as below:
below:
Take off the samples on the pan. The sampling operation is finished. Then the
balance can be used for counting.
Press
key to return to normal weighing mode (Pressing
key af-
ter it returns to weighing mode will bring back to counting mode and the unit
weight data is still stored for use).
Note:
1. If a container needs to be used, press TARE key to subtract its weight before entering into the
counting mode.
2. If the unit weight is too small (less than 0.2 of a scale division), the display will show: --or-- PCS.
4.4 PERCENT (%) WEIGHING MODE
In normal weighing mode, press the
key twice to enter into percent weighing mode.
Press
or
key to change to “100.00%”.
SAMPLING
Put the item to be considered 100% on the pan and press the
key. Then
the displayed value starts flickering. Several seconds later, it stops flickering.
Take off all the weight on the pan and the display shows as below:
