System tools mode
24
Code no. 576017
Rev. nº 02/0415
6. SYSTEM TOOLS MODE
Group of tools aimed at preparing, personalising, informing and controlling the overall operation of the dryer.
Within this group, the tools are grouped into different menus.
CONFIGURING the system. It contains many settings that allow the operation of the dryer to be adapted to the
specific needs of each user.
Information regarding this intervention mode: Chapter 7 on this manual.
INFORMATION regarding the dryer’s features, executed functions and alarms detected by the machine’s
control system.
Information regarding this intervention mode: Chapter 8 on this manual.
ACCOUNTING Menus aimed at controlling and registering the payments made.
Information regarding this intervention mode: Chapter 9 on this manual.
6.1. Accessing the Tools mode menus
To access the Tools Mode, the dryer should not be running any programs.
Access
Hold the
key down for a few seconds. The dryer will emit a beep and freeze the instruction display.
Enter the access code and press the
key.
The dryer screen will display the three intervention modes.
Select the icon for the mode to be run.
Selecting the Run Programs mode makes it possible to leave Advanced Mode.
Information on how to manage and use these areas is displayed on the screen in
written text.
Use the keys on the control panel to access the different blocks in the TOOLS mode.
Keyboard functions in the TOOLS mode menus
Horizontal movement
Vertical movement
Selecting/modifying settings and values
Access to the selected menu or block
Back to higher level
