Instructions for Charging: (Avoid over charging, remove battery when not use)
Open the ALC-20 Charger.
Make the ALC-20 Charger connected with the micro USB Cable.
Insert battery - Positive Side (+) Face Up into the charging socket. (as the Figure 1)
The LED Indicator is in red as the battery is charging.
The LED Indicator is in green as the battery is with 70%-80% power capacity.
The LED Indicator is off as the battery is fully charged.
To remove the cell, simply press the battery shrapnel to take it out and place it into your device.
(as the Figure 2)
WARNING:
PLEASE CHARGE THE BATTERY WHEN IN LOW BATTERY STATUS. BATTERY WILL BE FULLY
DEAD FOR NOT CHARGING IT 10 DAYS LATER
Figure 1.
Insert the battery
Figure 2.
Remove the battery
Instructions for Charging: (Avoid over charging, remove battery when not use)
Open the ALC-20 Charger.
Make the ALC-20 Charger connected with the micro USB Cable.
Insert battery - Positive Side (+) Face Up into the charging socket. (as the Figure 1)
The LED Indicator is in red as the battery is charging.
The LED Indicator is in green as the battery is with 70%-80% power capacity.
The LED Indicator is off as the battery is fully charged.
To remove the cell, simply press the battery shrapnel to take it out and place it into your device.
(as the Figure 2)
WARNING:
PLEASE CHARGE THE BATTERY WHEN IN LOW BATTERY STATUS. BATTERY WILL BE FULLY
DEAD FOR NOT CHARGING IT 10 DAYS LATER
Figure 1.
Insert the battery
Figure 2.
Remove the battery
