System 3000
Touch top unit
The blind/shutter moves in the lower end position direction.
￭
Touch and hold surfaces (1) and (3) simultaneously.
The status indication (5) flashes once and then lights.
The blind/shutter stops and continues to move again after 4 seconds.
￭
As soon as the blind/shutter has reached the lower end position, release the surfaces and
touch surface (3) within the next 4 seconds.
The status indication (5) flashes once.
The running time is saved. The blind/shutter moves back to the upper end position.
Blind/shutter position movements
The blind/shutter position can be set in two different ways with surface (4):
￭
Swipe slowly over surface (4) and release at the desired position. The touch must be
longer than 1 second from the start of the touch to the release.
The status indication (5) follows the touch. Blind/shutter moves to the selected position
after the release.
￭
Touch surface (4) at the desired position for longer than 1 second.
Blind/shutter moves to the selected position after the release.
Adjusting the slats
￭
Touch surfaces (1) or (3) for less than 1 second.
Saving the slat change-over time
￭
From the upper end position touch surface (3) for longer than 1 second.
The blind/shutter moves in the lower end position direction.
￭
Touch and hold surfaces (1) and (3) simultaneously.
The status indication (5) flashes once and then lights.
The blind/shutter stops and continues to move again after 4 seconds.
￭
As soon as the blind/shutter moves again, release the surfaces in any position and touch
and hold surface (1) within the next 4 seconds.
Slats open.
￭
As soon as the slats are fully changed over, release surface (1).
The status indication (5) flashes once.
The slat change-over time is saved. The blind/shutter moves back to the upper end posi-
tion.
Saving the ventilation position
With a Venetian blind the blind/shutter position and the slat position are saved.
￭
Move blind/shutter to the desired position and with a Venetian blind also set the slat posi-
tion.
￭
Touch and hold surface (2) for longer than 4 seconds.
The status indication (5) flashes once.
The blind/shutter initially moves in the direction of the old ventilation position. After
4 seconds the blind/shutter stops, moves to the new ventilation position and saves it.
￭
Release surface (4).
If the ventilation position is saved again, the old position is overwritten.
Activating / deactivating the disabling function
The disabling function disables extension operation in the "AB" direction. The local operation on
the top unit continues to be possible.
3 / 8
32403002
10867543
21.10.2020