Figure 4: Load curve of mixed loads
i
Mixed-load operation of LED lamps or compact fluorescent lamps with other permissible
loads possible. Note load curve (Figure 4).
Power reduction
when surface-mounted
20 ... 450 W/VA
per 5°C in excess of 25°C
-10 %
when installed in wooden or dry construction
walls
-15 %
when installed in multiple combinations
-20 %
Connection
single stranded
1.0 ... 2.5 mm²
Power boosters
See power booster instructions
Control output A
Current carrying capacity
100 mA
The icons used to label the dimmer load show the load type that can be connected to
a dimmer and the electric behaviour of a load:
R = ohmic, L = inductive, HV LED = dimmable HV-LED lamps
6.2 Troubleshooting
Connected lamps switch off in the lowest dimming position or flicker
Cause: The set minimum brightness is too low.
Increase minimum brightness.
Connected lamps flicker
Cause: Lamps are not dimmable.
Check manufacturer's instructions.
Exchange lamps for another type.
Connected lamps do not switch on in the lowest dimming position or only after a delay
Cause: The set minimum brightness is too low.
Increase minimum brightness.
Connected lamps in the lowest dimming position are too bright; dimming range is too
small
Cause 1: The set minimum brightness is too high.
Reduce minimum brightness.
32534532
10499194 I00
20.12.2013
5/6
Dimmer push-button/2-way low voltage