GIRA
Info
KNX IP-Router
Installation Instructions
KNX IP-Router
9/07
Page 1 of 4
System information
This device is a product of the Instabus-KNX system
and complies with KNX directives.
Detailed technical knowledge obtained in Instabus
training courses is a prerequisite to proper under-
standing.
The functionality of this device depends upon the soft-
ware.
Detailed information on loadable software and attain-
able functionality as well as the software itself can be
obtained from the manufacturer’s product database.
Planning, installation and commissioning of the unit is
effected by means of KNX-certified software.
An updated version of the product database and the
technical descriptions are available in their latest ver-
sion on our Internet homepage.
Function
Description
• Rail-mounted device for installation in distributions
• Interconnection of KNX lines via local area data
networks (LAN) based on the use of the IP protocol
(IP = Internet Protocol)
• Use as line / area coupler (filter tables)
• Interconnection of KNX devices with PCs or other
DP devices via IP (use as data interface)
• Power supply via external power supply unit
(accessories)
• Transmission of KNX system failure message to
the PC
• Electrical separation between KNX and IP network
KNX IP-Router
Order no.: 1030 00
Safety instructions
Electrical equipment must be installed and fitted
by qualified electricians only.
Failure to observe the instructions may cause
damage to the device and result in fire and other
hazards.
Supplying the IP router with power from the KNX
unit (‚non-choked‘ output) is not permitted. Risk
of grounding the safety extra-low voltage of the
KNX system.
Use safety transformers in acc. with EN
61558-2-6 or doorbell transformers in acc. with
EN 61558-2-8.
These instructions are part of the product and
must be left with the customer.
i
Depending on application, access require-
ments, data security and data volume it may
be advisable to install independent network
paths for individual services using the IP net-
work.
