GIRA
Info
Triple antenna outlet socket EDA 3902 F
Installation instructions
Triple antenna outlet socket EDA 3902 F
09/99
Page 2 of 3
Flush mounting
15
c
m
10
8
2
fig. 1
The antenna outlet sockets can be installed in
flush mounting boxes of 58 mm Ø.
Provide the coaxial cable being either concealed
or enclosed in conduits with a reserve of approx.
15 cm inside the flush mounting box.
Strip the cable end.
K
SK
SK
S
fig.
2
Loosen the clamp K.
Fix the centre conductor with the contact screw
S.
Fasten the clamp K.
Take care that safe connection is provided!
Insert the antenna outlet socket into the flush
mounting box and fix with the two expanding
claws SK.
Complete the antenna outlet socket with the
cover plate.
Surface mounting
A
A
length 15 cm
fig.
3
Break out one of the marked cable entry covers
at the distance frame as required.
Fix the distance frame to the wall using the two
screws A supplied.
Pass the cable into the frame providing a reserve
of approx.15 cm. Strip the cable end as shown in
fig. 1.
B
S
B
K
fig. 4
Loosen the clamp K.
Fix the centre conductor with the contact screw S
(fig. 2).
Fasten the clamp K.
Take care that safe connection is provided!
Insert the antenna outlet socket into the distance
frame and fix with the two screws B supplied.
Complete the antenna outlet socket with the
cover plate.
