manualshive.com logo in svg

Gira DALI Gateway, Продуктовая документация, Страница: 95 / 136

Поделиться
Скачать
Gira DALI Gateway Скачать руководство пользователя страница 95

 

"DALI Gateway C00CX2 EN / C00CX4 EN" software 

Functional description 

 

 

Best. Nr. 1060 00 

Page 95 of 136 

 

 

Assigning groups 

After all devices connected to the DALI Gateway have been identified and renamed the devices can be 
assigned to the created groups. 
For this purpose the DALI devices listed in the left window have to be moved into the right window of 
the selected group. The assignment can be done by activating the "->" button between the two 
subwindows. An assignment can be cancelled by selecting an assigned device and by activating the 
"<-" button. 
Using the same procedure it is also possible to have several devices simultaneously assigned or 
cancelled. 

 

It is possible to assign devices to more than just one group. The DALI commissioning environment of 
the ETS plug-in differs depending on the application program as follows... 

In case of application programs of version "0.4" or "1.4" (recommended), it is initially only possible to 
assign a DALI device to only one group. This makes the device assignment easier and more clearly 
and the explicit assignment does not result in group overlappings. The check box "Hide already 
assigned DALI devices" in the commissioning dialog is checked in this case (cp. fig. 39). This is the 
default configuration of the plug-in. 
Alternatively, the multiple group assignment of a DALI device can be activated, if required. To do so, 
the check box "Hide already assigned DALI devices" can be deselected. 

The application programs of version "0.2" or "1.2" always allow for a multiple assignment. No difference 
is made whether a DALI device may only be assigned to a group once or several times. The check box 
"Hide already assigned DALI devices" is not available. 

 

 

Figure 39: Check box "Hide already assigned DALI devices" in the  

DALI commissioning dialog of the ETS plug-in 

Содержание DALI Gateway









































































































































Отзывы:

Нет отзывов