manualshive.com logo in svg

Gira DALI Gateway, Продуктовая документация, Страница: 73 / 136

Поделиться
Скачать
Gira DALI Gateway Скачать руководство пользователя страница 73

 

"DALI Gateway C00CX2 EN / C00CX4 EN" software 

Functional description 

 

 

Best. Nr. 1060 00 

Page 73 of 136 

 

 

Soft-ON/OFF function 

The Soft functions permit the slowed- down switching on or off of a DALI group if a switching command 
is received via the “Switching” or “Switching central function” communication objects. 

If a Soft-ON function is activated, dimming will be executed until the parameterized switch-on 
brightness has been reached. This will also be the case if the DALI group has been switched on to a 
brightness value that is smaller than the switch-on brightness value. If a Soft-OFF function is activated 
dimming will take place after receiving an OFF telegram until 0 % brightness is reached (cf. figure 22). 

The dimming speeds can be parameterized separately for the Soft-ON as well as the Soft-OFF function 
in the ETS plug-in. As is the case with the relative or absolute dimming, the dimming time will be 
provided for the entire brightness range and thus for a brightness change of 0 % to 100 %. The DALI 
Gateway computes the dimming speed for a dimming increment of the Soft functions from the provided 
dimming time. 

The Soft-ON or the Soft-OFF functions cannot be retriggered due to the reception of other switching 
telegrams while tracking the switching status. The Soft-functions can be activated and configured 
separately in the ETS plug-in. 
 
 

Time for
Soft-ON

time

0 %

100 %

90 %

50 %

10 %

20 %

30 %

40 %

Brightness value

Switch-on brightness

Soft-ON

Soft-OFF

Time for
Soft-OFF

Minimum brightness

ON

OFF

Switching status
feedback

time

EIN

AUS

 

Figure 22: Dimming response of the Soft-ON/OFF functions 

for example: minimum brightness > 0% 

 

 The dimming of a Soft-ON function starts with the minimum brightness configured in the ETS plug-in. 

If a DALI group is switched off (brightness value = 0 %) and then switched on, the group will jump to 
the parameterized minimum brightness and will start the Soft-ON dimming with the switch-on 
brightness (cf. figure 22). 

Содержание DALI Gateway









































































































































Отзывы:

Нет отзывов