manualshive.com logo in svg

Gira DALI Gateway, Продуктовая документация, Страница: 35 / 136

Поделиться
Скачать
Gira DALI Gateway Скачать руководство пользователя страница 35

 

"DALI Gateway C00CX2 EN / C00CX4 EN" software 

Functional description 

 

 

Best. Nr. 1060 00 

Page 35 of 136 

 

 

After the import has been confirmed the plug-in will ask whether the import is to take place with or 
without KNX/EIB group addresses (cf. figure 10). 
When importing without group addresses the plug-in will not transfer any associations between 
communication objects and group addresses of the XML file. Objects are not associated with any group 
addresses after the import. 

It is also possible to import a XML file with the KNX/EIB group addresses stored in the file. Before 
transferring, the plug-in will check all group addresses stored in the XML file. The plug-in will discard 
the group addresses if they have either not been created in the current ETS project or if (in case they 
are available) are of the wrong data type.  

 

 If an XML import with transfer of the group addresses is used on a device that has already been 

preconfigured with group addresses in an ETS project, the following must be taken into 
consideration: 
Group addresses are not transferred completely from the XML template if group addresses are 
already linked with communication objects! In this case all group addresses in the device in question 
must be deleted in the ETS project before the XML import. Only after that can the XML import with 
group addresses be performed. 

 After each successful XML import with group addresses, the "Sending" flags of the addresses must 

be adapted "by hand". This adaptation must be performed separately for each communication object 
in the ETS configuration view with a closed plug-in. Setting the "Sending" flag configures in the ETS 
the group address an object uses to transmit telegrams actively to the bus (transmitting address). 
Only one address of a given object can be transmitting. All other addresses are exclusively receiving. 
During an XML import, the plug-in automatically sets the address with the highest value as 
transmitting 

 

Figure 10: Import dialogue with or without KNX/EIB group addresses 

 
 

 The import will also overwrite all DALI commissioning parameters (detected DALI devices and group 

assignments) with the data of the XML file. It must be pointed out that only the data stored in the ETS 
database will be adjusted. A prior DALI commissioning including the programming of the DALI 
devices will remain in the DALI devices. For this reason, a new DALI commissioning should always 
be carried out after the import of an XML file. 

Содержание DALI Gateway









































































































































Отзывы:

Нет отзывов