Operating instructions
Bluetooth wall transmitter
1-gang
2461 ..
2-gang
2462 ..
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel
+49(0)21 95 - 602-0
Fax +49(0)21 95 - 602-191
www.gira.de
[email protected]
1
2
Bluetooth wall transmitter
Safety instructions
Failure to observe the instructions can
result in damage to the device, fire or
other dangers.
Wireless transmission takes place via a
non-exclusive transmission path and is
thus not suitable for applications in the
security technology sector such as emer
-
gency-off or emergency calls.
These instructions are part of the product
and must stay with the customer.
Device components
(Figure 1, 2)
1 Rocker
2 Wireless module
3 Cover frame
4 Base plate
5 Adhesive dots
6 Adhesive film
Function
System information
The range of a wireless system depends on
various external factors. This range can be
optimised by the ideal choice of the installa
-
tion site.
Intended use
- Wireless transmitter that communicates
according to the BLE wireless standard.
- Installation on device box in compliance
with DIN 49073 or on smooth, level surfa
-
ces using screws or adhesive bonding.
Product properties
- Battery-free device without external power
supply.
- The transmission energy is generated from
mechanical energy by actuating the rocker.
Operation
Transmitting wireless telegrams
Press and release the rocker to send a wi
-
reless telegram.
Installation
To achieve good transmission quality, ensure
sufficient distance to possible sources of
interference, e.g. metal surfaces, microwave
ovens, hi-fi systems, TV sets, ballasts and
electronic transformers.
Adhesive mounting (Figure 1)
Ensure that the surface is clean, free of gre
-
ase and able to bear the load.
Apply the adhesive film (6) beforehand in
the case of transparent surfaces.
Apply adhesive dots (5) to the surface or to
the adhesive film (6) in the case of transpa
-
rent surfaces.
Press the baseplate (4) onto the adhesive
dots.
Plug the frame (3) onto the baseplate.
Attach the wireless module (2).
Attach the rocker (1).
Screw mounting (Figure 2)
Mount the baseplate (4) on a device box or
directly on the wall.
Plug the frame (3) onto the baseplate.
Attach the wireless module (2).
Attach the rocker (1).
Start-up
Assignment of wireless wall transmitter
and wireless receiver
In order for a wireless receiver to understand
a wireless telegram from the wireless wall
transmitter, this wireless telegram must be
assigned to the wireless receiver (see instruc
-
tions for wireless receiver).
Technical data
Ambient temperature:
-25 to +65 °C
Wireless frequency
2.402 ... 2.480 GHz
Transmission power
max. 1.1 mW /
0.4 dBM
Transmission range
in free field:
up to 75 m
in buildings:
approx. 10 m
Humidity:
0 % to 95 %
(no condensation)
1
2
3
4
5
TOP
TOP
6
1
2
3
TOP
TOP
4
Electrical devices may only be
installed and connected by a qua
-
lified electrician.
Materials
Penetration
Wood, plaster,
sheetrock
approx. 90 %
Brick, press board
approx. 70 %
Reinforced con
-
crete
approx. 30 %
Metal, metal grids
approx. 10 %
Rain, snow
approx. 1 to 40 %
I
Note
A higher contact pressure is requi
-
red for initial installation.
Observe TOP designation.