Figure 5: Detection field areas A, B and C, installation height 2.50 m
Figure 6: Arrangement of the areas A, B and C
o
When mounting the device, align it so that the alignment of areas A, B and C match the
projection.
i
Already pay attention to correct alignment when mounting the appliance box and
supporting frame.
Connecting and fitting the device in a flush-mounted box
Flush-mounted appliance box is mounted on the ceiling at the designated installation location.
o
Pull off decor ring (3).
o
When mounting the supporting frame (1), make sure that the areas A, B and C are aligned
correctly.
o
Run the bus cable through the supporting frame.
o
Use connecting terminal to connect bus line to the bus connection on the rear side of the
device.
o
Press the device into the supporting frame correctly aligned until it locks in place.
o
Attach decor ring (3).
82585602
20.09.2012
7/10
KNX/EIB
Presence detector