Configuration in the ETS
Order No. 2089 00
Page 27
7.6. Object table
Note for all group objects that signal an active connection
When using HTTP access, i.e. without a Gira S1 Windows client, the connection to the device (if per
-
mitted) is not closed immediately after loading the pages or closing the browser. This relates to the
technical optimisation of HTTP access in the Gira Device portal. HTTP connections may require up to
five minutes to close. This means that the corresponding group objects that signal an active connec
-
tion also do not signal closing until this point in time. In contrast, if using the Gira S1 Windows client,
the connection is closed synchronously.
The following group objects are available for the connection of group addresses at the Gira S1:
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
1
Allow remote access
Write
1 bit
1.003
C-W--
Category:
Remote access
Data type:
Enable
Function:
Allows or prohibits the connection of the device to the portal server. If the con
-
nection is prohibited, the device is never accessible from the outside.
Description:
1 = Allow, 0 = Prohibit
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
2
Allow remote access –
Status
Read
1 bit
1.003
CR-T-
Category:
Remote access
Data type:
Enable
Function:
Indicates whether the device is allowed to connect to the portal server.
Description:
1 = Allowed, 0 = Prohibited
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
3 (Residents)
Allow remote access
Write
1 bit
1.003
C-W--
5 (Installer)
Category:
Remote access
Data type:
Enable
Function:
Allows or prohibits remote access for each of the members of the group
Description:
1 = Allow, 0 = Prohibit
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
4 (Residents)
Allow remote access –
Status
Read
1 bit
1.003
CR-T-
6 (Installer)
Category:
Remote access
Data type:
Enable
Function:
Indicates whether remote access for each of the members of the group is permit
-
ted.
Description:
1 = Allowed, 0 = Prohibited
