Gira 0529 00, Руководство пользователя, Страница: 12 / 28

RemoteVisu
12
05.2012/V 1.2
2.2.3 Popup page
The RemoteVisu offers popup visualisation pages.
If a visualisation page is to be laid over the visualisation page to be called (popup), it is
possible with the XXPOPUP symbol. If this symbol is set on a visualisation page, it defines
the lower right-hand corner and at the same time it defines this page as a popup. All
information which lies outside the limited area is not shown. The page is laid centred over
the existing page when it is called.
Figure 2.3 Creating a symbol for a popup Left: Draft of popup page. Right: Called popup in
the visualisation
Create the symbol as described above:
Image ID: XXPOPUP
Designation (name): "RemoteVisu_PopUp".
Using a small, square symbol is advisable. The upper left-hand corner of the symbol defines
the page size.
A mask (e.g. message archive) can be called from a popup page. However, it is not possible
to call another visualisation or popup page within a popup page.
The previous page can be accessed with the "Return button" (see below).
With a popup page it is possible, for example, to realise device-specific popups, e.g. a popup
for blind control.
The later popup can be seen together with the small red XXPOPUP symbol, which limits the
area to be shown, on the left of the screen (see Image 2.3). The result which can then be
seen as a popup in the RemoteVisu is shown on the right.
The size and colour of the XXPOPUP symbol are not significant, as it of course lies outside
the defined display area.
Only ONE symbol (either exactly one XXPOPUP or exactly one XXPAGE) may be created per
page!
2.2.4 Transferring a project
The project must always be completely (data+voice messages) transferred to the
HomeServer or FacilityServer.