GIRA
Info
Multifunction Radio Transmitter
Installation Instructions
Multifunction Radio Transmitter
05/01
Page: 4 of 8
1)
2)
Mode Selection
1) Single-rocker operation using installation push-
buttons
Single-rocker switching or dimming using up to four
installation push-buttons (E1-E4).
Actuation leads to switching over (toggling) of the
telegram type (on/off, brighter/darker) in the multifunction
transmitter. Toggling takes place in the transmitter.
Therefore, to obtain the desired response, the multi-
function transmitter will possibly have to be actuated twice
after local operation or when the receiver has been
controlled by a different transmitter.
2) Double-rocker operation using installation push-
buttons
Double-rocker switching, dimming or blind operation using
installation push-buttons. Inputs E1/E2 and E3/E4 form
one channel each.
3)
4)
3) Connection of installation switches (normally open
contacts)
Inputs E1 to E4 form one switching channel for controlling
radio receivers with installation switches (normally open
contacts). The switching contact acts in the same way as
the switch connected to the multifunction transmitter.
4) Connection of installation switches (normally closed
contacts)
Inputs E1 to E4 form one switching channel for controlling
radio receivers with installation switches (normally closed
contacts). The switching action of the contact is opposed
to that of the switch connected to the multifunction
transmitter.
5)
6)
5) ALL-ON, ALL-OFF, lightscapes 1 and 2
E1: Switching ON all programmed receivers.
(ALL-ON function).
E2: Switching OFF all programmed receivers.
(ALL-OFF function).
E3: Calling or saving lightscape 1.
E4: Calling or saving lightscape 2.
6) ALL-OFF, lightscapes 1 to 3
E1: Switching OFF all programmed receivers.
(ALL-OFF function).
E2: Calling or saving lightscape 1.
E3: Calling or saving lightscape 2.
E4: Calling or saving lightscape 3.
