Page 48
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
Once the cooking times for each tray have been set (see points - manual setting or menu setting), the EASY SERVICE function can also be
selected.
In this case, the dishes will be ALL ready at the same time, as the oven will warn the operator when it is time to put a tray in the oven cavity,
based on the duration of the cooking cycle set for each tray.
4.5.4 Rack Control - Easy Service
PUSH
SET
C
Manual Setting:
A. Press “Rack Control”
B. Select the customised menu e.g. “Breakfast”
C. Enter the cooking parameters
D. Select “Easy Service”
E. Select menu items. Menu items will be assigned to trays in the order starting at 1 in the order selected
F. Touch “Start” for the rack control to begin
G. The countdown timers start. To have the trays ready at the same time, place the “IN” tray into the oven first (add each additional tray as
required)
H. If needed the pre-set timers can be adjusted. Select the tray to be adjusted. Select “Time” or “Core Probe”
I. Turn the navigation dial to adjust the value
J. Press the navigation dial to save the set value to the selected tray
A
F
D
B
I
J
H
G
E
4.0 Operation
