1
GINGKO AUDIO
ClaraVu™ 7 Mk 3 Modular Speaker System
Owner’s Manual
Thank you for purchasing Gingko Audio’s ClaraVu 7
Mk3 speaker system.
These striking speakers are a result of 10 years of intensive
research and development. Each speaker is hand crafted in
the USA using the finest parts in the world. Custom drivers,
high-quality caps and coils, OCC copper cabling and unique
cabinet construction result in superlative resolution and
musicality.
Each ClaraVu speaker is hand-built in the USA instead of coming off a factory line. Each is thoroughly
tested and comes with a 2-year warranty to the original owner.
The ClaraVu 7 Mk3 modular speaker system consists of a monitor speaker and a matching powered
subwoofer. They are perfect for apartment-size high-end systems, yet their big sound offers more than
satisfying performance in reference-level setups. A combination of 85 dB sensitivity and 8 ohm minimum
impedance means the ClaraVus are easily matched to a wide range of tube or solid state amplifiers.
The ClaraVu Mk3 speaker enclosures are available in three beautiful finishes: maple, cherry and gloss
piano black. The modular construction of the system means that you can buy the monitor speakers with
matching stands first, and then add the sub modules to make a full range system.
The ClaraVu 7 Mk3 monitor
is
a three-way speaker using a ribbon super-tweeter, 1” soft dome tweeter
and twin 6.5” paper cone woofers in a unique isobaric configuration. Two woofers are mounted one in
front of the other in a sealed paperboard tube inside a rigid cabinet. The same design is used in the
drivers of the sub module. This design minimizes vibration and standing waves and results in the
ClaraVu’s high-resolution and extreme musicality.
The ClaraVu 7 Mk3 speakers will show you a “clear view” into your music by capturing all the details and
nuances of the recording and performance.
SPECIFICATONS:
Monitor Speakers – Retail $5995/pair Powered Sub Modules – Retail$1500each
Super-tweeter: ultra-low-mass ribbon tweeter
Tweeter: 1” silk dome using patented technology
Woofers: 2 custom drivers, 6.5” paper cone
Woofers: 2 custom drivers, 6.5” paper cone
Sub amp: 75w into 8 ohms, 100w/ into 4 ohms
Frequency Response: 45Hz-20KHz +/- 3dB
Options for hookup: low-level via interconnects or
Impedance: 10 ohms nominal, 8 ohms minimum
high-level via speaker wires
Sensitivity: 85 dB
Adjustments: Volume, Crossover frequency, Phase
Recommended power: 30 watts
Dimensions: 22”h x 9”w x 15”d
Sensitivity: 85 dB
Weight: 45 lbs. each
Weight: 48 lbs. each
Cabinet finish - maple, cherry, and piano black
Cabinet finish - maple, cherry, and piano black
Stands – Retail $500/pair
Dimensions: 27”h x 13”w x 14”d
Weight: 38 lbs each
Finish: Gloss Piano Black
