Gin Gliders Genie lite 3 rescue deck, Руководство пользователя

Страница: 11 / 19

G L 3 c c a a : 11
Installing the Genie Lite 3 rescue deck
The Genie Lite 3 rescue deck was designed especially for the Genie Lite 3 However it
can be used with most current pod harnesses
If you intend to use it with a different harness than the GL3 please make sure that the
rescue deck does not interfere with the cockpit of your harness and that the rescue can be
deployed at any time
Gin Gliders recommend that rescue installation is performed properly by a competent
person The rescue parachute is a pilots last resort and failure to pack or connect the
reserve parachute in the correct way may cause death or severe injury The pilot is
responsible for ensuring proper installation
This Genie Lite 3 rescue deck is compatible only with the Yeti UL rescues Other
manufacturers rescues may also be used but we cannot guarantee their function The pilot
is responsible for checking compatibility
Every first installation of a rescue system into the Genie Lite 3 rescue deck must be
checked by a qualified paragliding professional for compatibility To verify the installation
you must perform a test deployment by sitting in a simulator
Rescue parachutes should be repacked at least every 150 days so installing your rescue in
a new Genie Lite 3 rescue deck may also provide a good opportunity for a repack After
every repack of the rescue parachute you should also do a compatibility check
Rescue compatibility
MAKE SURE THAT THE RESCUE PARACHUTE CAN BE RELEASED FROM THE RESCUE
DECK it must be done by you the pilot sitting in the harness hanging from a simulator
WARNING: If you are in any doubt about any aspect of rescue installation, seek
professional advice
IMPORTANT: You must perform a test deployment from a simulator to verify the
installation.
IMPORTANT: Make sure that both bridle ends are connected with a main carabiner on
each side.
IMPORTANT: The deployment bag of other manufacturers rescue systems may have
different loop positions which may cause a deployment failure.