![background image](http://html.mh-extra.com/html/gima/primaled-so/primaled-so_operators-manual_2228147010.webp)
Operator
’
s Manual
MO080-IT
12/09/2017
Rev.3
Page 10 of 20
3.3
Safety conditions (secondary effects)
-
Do not direct the light source into the patient’s and/or operator’s eyes.
-
Obligation to adequately protect the patient’s eyes.
Failure to follow such precautions could cause glare and potential damage to the retina.
-
Never place and/or hang anything on the Product.
Unless this precaution is taken, positioning will not be reliable and the danger exists of such objects falling in the
operating area.
-
Never hang on the Product with the body weight of a person.
Failure to follow such precaution could damage the Product structure.
-
Never cover the head of the Product during operation.
Failure to comply could prevent heat exchange with the environment and the Product could overheat.
-
Avoid knocking the rocker arms and Product head.
A violent knock could damage the Product and pieces of paint could chip off and fall onto the operating field in
the patient area.
-
To avoid any significant risk of reciprocal interference due to the presence of the Product during specific exams or
treatments, see section 9 of the manual.
3.4
Controls to be performed every time before the lamp is used
To make sure the Product is safe and provides a correct diagnosis, every time before use, the operator must check:
-
The lamp has been correctly disinfected;
-
The emitted light is stable and of adequate intensity;
-
The flexible arm remains in the selected position, without falling.
4
Description and operation
4.1
Description
The Product locally lights up the patient’s body thanks to 9 LEDs focalized by means of specific lenses. 3 non-
focalized LEDs are also fitted to permit using a courtesy or reading light.
Positioning the light beam is made easy thanks to the articulated arm and is done manually. By means of the
membrane keyboard on the reflector, the various product functions can be easily controlled.
4.2
Operation
To switch on the Product, use the main switch.
IMPORTANT: do not position the device so it is hard to reach the main switch in case of an emergency.
The following functions can be controlled by means of the keyboard:
Switch the lamp on and off by means of the standby key (1), adjust light intensity by pressing keys (2) and (3), with
display of the level of intensity achieved by means of 3 green positions micro-LEDs. Select the colour temperature by
means of the “K” key (4) with display by means of 2 green micro-LEDs, and select the courtesy light by means of the
“C” key, which permits switching on the 3 LEDs without lens, not to be used for observation (5). To select the
courtesy light, the lamp must be switched off. In courtesy position, only the light intensity can be adjusted, while
temperature change is not possible. To return to normal operating position, the standby key (1) must be pressed.
2
3
The light beam cannot be adjusted.
1
4
5
To move the lamp use the sterilisable handpiece provided. After use, to
safely switch off the Product, press the main switch.
Содержание PRIMALED SO
