background image

Rev: 09/25/2018

Durability Index Apparatus

SS-18 and SS-18F

PHONE:  800-444-1508                                                 

        P.O. Box 200, Lewis Center, Ohio  43035-0200 

FAX:      800-255-5314       

       

740-548-7298 

           E-mail: [email protected]     Website:

 www.globalgilson.com

 

                740-548-5314  

                  

OPERATING MANUAL

 

SAFETY INSTRUCTIONS:

Whether you are the owner, employer, operator, or maintenance 
person for this machine, safety is your responsibility. You are 
responsible for operating and maintaining this equipment 
in compliance with these instructions. You should always 
review and completely understand these safety and operating 
instructions before using this machine.

Installation and use of the SS-18 Durability Index Apparatus 
must conform to all OSHA requirements, the national electrical 
code (NEC), and all local codes.

 

WARNING!

1. 

DANGER! This machine operates on electrical 
current. Improper use could result in electric shock, 
electrocution, injury by explosion, or even death.

2.  Voltage and moving parts around motors and motor-

driven equipment can cause serious or fatal injuries. 
ALWAYS disconnect power source before working 
on motor or its connected load.

3.  Motor 

MUST be securely and adequately grounded by 

a method approved by the NEC and by local codes.

4. 

DO NOT use this equipment in a hazardous location 
as defined by Article 500 of the National Electrical 
Code (NEC).

 

INSTALLATION:

1.  Carefully unpack and inspect the unit for shipping damage.

2.  Bolt the SS-18 to the floor or to a sturdy, rigid table.

3.   Connect the power cord to a properly grounded power 

supply, rated for correct voltage and amperage output.

4.  Store unit in a clean, dry, indoor location when not in use.

SS-18 shown with SSA-22

ASTM D 3744; AASHTO T 210; CALIF. 227, 229

 

MAINTENANCE:

Read and completely understand all safety instructions before 
performing maintenance on the SS-18.

Disconnect power and allow motor to come to a complete stop 
before performing maintenance or inspection.

A. Periodically inspect the apparatus, checking for the 

following:

 
1.  Dirt accumulation.

2.  Unusual noises or vibration.

(Continued on back.)

Отзывы: