Gilson PLC 2050, Руководство пользователя

Страница: 95 / 132

95 PLC PurifiCation SyStemS | uSer’S GuiDe
p
LC
W
iT
H
A
U
TO
SA
M
p
Le
R
C
O
n
F
iG
U
R
A
Ti
O
n
Installation
install the GX-241 Liquid handler and the Verity® 4020 Single Syringe Pump as described in
the
GX-241 Liquid Handler User’s Guide and the VERITY® 4X20 Syringe Pumps User’s Guide .
Complete instructions for each step are included in the ‘installation’ chapter. the instrument
and its components should be set up in the order shown below.
1. Set up the GX-241 Liquid handler according to the instructions provided in the ‘installation’
chapter in the GX-241 Liquid Handler User’s Guide .
2. Place the liquid handler to the left of the PLC Purification System.
3. Place the 3 x 100 mL solvent reservoir rack (Pn SPL-2334-hDw), which must be installed
adjacent to the rinse station.
4. Set up the Verity® 4020 Single Syringe Pump according to the instructions provided in
the ‘installation’ chapter of the 4X20 Syringe Pumps User’s Guide .
5. Place the syringe pump to the left of the
GX-241 Liquid handler.
6. install the syringe. the syringe is ordered
separately, according to the PLC sample
loop size. refer to the table below for
part numbers.
Syringes
Part
number
Description
25025344 Syringe 5 mL
25025345 Syringe 10 mL
25025346 Syringe 25 mL
Figure 70
PLC Purification with GX-241 Liquid handler and Verity® 4020 Single Syringe Pump
Figure 71
Location of 3 x 100 mL Solvent Reservoir