Gilson PLC 2050, Руководство пользователя

Страница: 48 / 132

48 inStaLLation | PLC 2050/2250/2500 PurifiCation SyStemS
IN
S
ta
LL
a
f
t
e
r
M
ar
k
e
t
O
p
tI
O
N
S
Install the Fraction Collector Cover Kit
this option can be mounted on PLC Purification Systems placed outside of a fume hood
to allow the extraction of fraction collector vapors. the transparent door is secured with a
magnet. an adaptor, located on the right side of the PLC Purification System, is used to affix
a pipe (not supplied) with a metallic clamp. the pipe should then be connected to an external
air extractor.
Install the Rack Overlays
rack overlays for 18/16 mm tubes and 13/12 mm tubes
are designed for glass tubes identification. they
correspond to the default collection probe trajectory
called 'alternating Vertical' in the GGP software.
the characters inscribed on the front correspond to
number order, whereas those on the back are related
to the physical position of tubes in the rack (n° of rack
+ n° of tubes in the rack).
Figure 42
fraction Collector Cover
Collector Cover with
magnetic Lock
transparent
Door
metallic
Clamp
adapter for
Pipe Connection
and air extraction
Figure 43
Collector racks with overlays
Figure 44
overlays for racks 18 mm tubes (front Side numbering)
Figure 45
overlays for racks 18 mm tubes (Back Side numbering)