(Continued on back.)
INTRODUCTION
The versatile HM-397 Load Frame can be utilized for multiple soil
tests. Individual component sets can be fitted to the load frame to
perform California Bearing Ratio (CBR), Unconfined Compressive
Strength, Soil Cement, and Triaxial tests.
This 10,000lbf (44.5kN) capacity frame has a strain rate of
0.0001—0.3in/min (0.00254—7.62mm/min) controlled to +/- 1%
of set point. Front panel controls allow the operator to adjust
the direction and speed of the platen. The strain rate is set using
thumbwheel selector. Sliding the cross-arm up or down the
coarse-threaded 1.25in (32mm) diameter rods and tightening
the nuts makes adjustment for the wide variety of testing
components quick and easy.
FEATURES
• Precision adjustable strain rate of 0.0001—0.3in/min (0.00254—
7.62mm/min) allows for multiple testing options
• Powerful 1/4hp DC drive motor
• Load capacity up to 10,000lbf (44kN)
• Maximum frame opening of 11.9 x 37.3in (302 x 947mm)
• Durable 16-gauge steel cabinet and precision loading screw
• Hardened steel 8in (203mm) diameter platen accepts a wide
variety of test fixtures
• Heavy 1.25in (31.8mm) diameter vertical rods with coarse threads
• Front panel controls
• Upper and lower limit indicator lights
• Corrosion-resistant components
UNPACKING & SET UP
1. Inspect your HM-397 for damage, remove it from the pallet.
2. Place the Load Frame on a sturdy, level surface such as a bench
top or HMA-94 Load Frame Cart.
3. Connect to a properly grounded power supply with correct
voltage and amperage output.
4. Adjust and level the crossarm to the appropriate height.
5. Install required Component Set and any accessories required
for testing.
HM-397
Gilson Load Frame
0.0001—0.3in/min, 10,000lbf (44.5kN)
HM-397 and HM-397F
OPERATING MANUAL
Rev: 05/2020
PHONE: 800-444-1508
P.O. Box 200, Lewis Center, Ohio 43035-0200
740-548-7298
E-mail: [email protected] Product Web Page:
FAX: 800-255-5314
740-548-5314
