GILES GBF-70 Скачать руководство пользователя страница 76

Страница: 76 / 108

Cleaning & Maintenance

GBF-70 Fryer

7. Using a non

‐

detergent, bio

‐

degradable degreasing cleaner, such as

Simple Green® Crystal Foaming Cleaner

thoroughly clean the

filter pan

⑦

Rinse thoroughly with hot water spray and dry completely. Flush out the

hoses to remove any filter sediment that may have gotten into them, then be certain that all residual water is
drained out.

8. Ensure that all parts are completely dry. Reassemble

filter pan

assembly as shown, using fresh filter media.

Use only one (1) sheet of properly sized filter paper

, placin it on top of

Support Screen

. Be sure that media is

the correct size and is properly installed underneath the

Hold

‐

down Frame

③

and that all

four (4) Locking

Levers

are securely engaged with the studs.

9. Position assembled

filter pan

under the unit and re

‐

connect

filter pan hose

⑧

the fryer coupling (push in slip

‐

ring while inserting hose fitting). The connection

must be tight and secure for proper operation.

5.03

Cleaning the Filter Pan & Refreshing Filter Media - continued

Optional Filter Screen Note

When opting to use the sustainable

Stainless Steel Filter Screen

, purchased separately from

Giles,

please follow

the usage and cleaning instructions provided with the item.

This item is an alternative substitute for filter paper

and is NOT to be use in addition to filter paper

. With proper cleaning and care, the screen should provide many

months of dependable service.

Thoroughly wash and clean the screen periodically ... wash using

ONLY

clean hot water and a stiff bristle brush.

NOT

use soap, or other cleaners. Shake off excess water and blot dry with clean towel (ideally screen should

dry overnight) before reinstalling.

Содержание GBF-70













































































































Результаты поиска

Содержание GBF-70

Отзывы:

GILES GBF-70, Руководство по эксплуатации и обслуживанию, Страница: 76 / 108

Результаты поиска

Содержание GBF-70

Отзывы: