GILBARCO VEEDER-ROOT FlexPay IV Insite360 Encore, Руководство по программированию и обслуживанию

Страница: 53 / 106

Media Configuration for Applause Media System Omnia PCB
MDE-5369E FlexPay™ IV (with Omnia) Programming and Service Manual · April 2020 Page 5-23
Media Configuration for Applause Media System
To view, modify, and test the Applause Media System configuration on dispensers equipped
with FlexPay IV and Omnia, proceed as follows:
1
Select the Media tab on the left sidebar of the web page.
Figure 5-33: Media Configuration for Applause Media System
2
Click Save .
3
Click Check Pump Monitor in the Media Utility section.
Note: Side A/B A/V, Idle and Busy tests were removed and replaced with “Diagnostic A/V
tests” in version 03.02 and higher. For more information, refer to “Omnia Diagnostic”
on page 5-45 .