GILBARCO VEEDER-ROOT FlexPay IV CRIND, Руководство по установке

Страница: 54 / 66

MDE-5222F
50
SECTION 6 - APPENDICES
6
M09751A002 Intercom Option
The function of the intercom board is to allow sharing the speaker between the Applause Media System
audio and the station intercom system.
P411 and P411A intercepts the power to the FlexPay Control Board (FCB) to power the intercom interface
board.
Cable and Connector Description
Figure 2: Block Diagram
J411
J504
Intercom Interface PCA

(M09751A002)
Wire and Speaker
NGP Cable
(M09259A002)
To P211 on
PIP3 Speaker
Output
Red/White Pigtail
Wiring
J411 P411A
To P505 on the intercom
interface board on the
other side M11870 Side-to-side Cable
M10590A004 Cable
Cable Connector To Description
M10590A004 P411A 24 V input Remove the existing 24 V input to the
PIP3 (P411) and connect it to P411A.
J411 24 V output Connects to FCB P411
Red/white
pigtail wiring Intercom audio Connects to intercom speaker wiring
from cashier’s intercom base station.
J504 Applause Media System audio Connects to P504 on FCB
M09259A002 P504A P211 on PIP3 speaker output
M11870 P505 Side-to-side mute cable Connects to P505 on the intercom
interface board on the other side