7
Gigaset T440 PRO / Gigaset T640 PRO / Admin Guide INT en / A31008-N2003-R103-2-7620 / starting.fm / 6/26/17
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Setting up and connecting a device
Connecting PoE clients to LAN ports
The device makes available 4 Gigabit Ethernet LAN ports (10/100/1000Base-T) and 8 Fast
Ethernet LAN ports (10/100Base-TX) to connect Ethernet devices (such as IP phones).
The LAN ports support IEEE PoE standard 802.3af-2003. In addition to transmitting the other
data, the connectors can power PoE-capable devices connected over the Ethernet cable. The
LAN connectors automatically detect devices supporting the IEEE 802.3 standard, the device
classification and the maximum power permitted.
Connecting analogue devices
Analogue phones, dial-up modems and fax devices can be connected to the FXS ports. These
analogue devices can then be used for Internet telephony.
An FXS port supplies the line voltage and ringing current for the phones.
Connecting to the phone network or PABX
FXO ports are only available for the Gigaset T640 PRO.
An FXO port establishes the connection to the public phone network (PSTN) or an analogue
PABX. An FXO port receives the line voltage and ringing current for the phones from the phone
network or PABX (as with analogue phones). An FXO port is the interface between the analogue
phone network or system and the Internet.
CAT 5e or CAT 6 Ethernet cable
(not supplied)
¤
Connect the GE or FE LAN port to the
network connection of an IP phone
or
¤
Connect the IP phone directly to the
Ethernet network
RJ11 phone cable (not supplied)
¤
Connect the FXS port to an analogue
device (e.g. phone, dial-up modem
or fax device)
RJ11 phone cable (not supplied)
¤
Connect an FXO port to an analogue
phone port (e.g. the phone network
connector or PBX)