33
Modules
Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010
V
e
rsion 2, 06.0
8
.2010
The Gigaset T300 PRO / Gigaset T500 PRO module designer
A module always contains (as a minimum) a function, which defines what the module
should execute. Hence, the most important step in creating a module is the function
development in the
Development
tab.
Development
¤
In the left-hand side of the window, click on
S
under
Functions
to create a function.
This pane will eventually show all functions of the current module and can be opened
for editing.
The
Function-Settings
tab contains the following key properties:
u
The name of the function as it appears on the left in the
Functions
list.
u
The
Set function public
option. This is used to allow the function to be integrated into
other modules.
u
The
Set this function as Module target function
option. The target function for a
module will always be executed when the module is started. If the module only has
one function, then this is naturally the target function.
The
Edit
tab is where the function is actually developed. This view contains two main
panes: the editor is displayed in the centre with the component selection
Components
on the right.
The components comprise core components listed in the
Library
menu and public
(
Public
) functions from modules that already exist.
Please note
Several windows of the module designer can be open at the same time, making it pos-
sible to edit an existing module and create a new one simultaneously. Functions and
individual functional components can be copied and inserted in both module design-
ers.
