17
Users
Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010
V
e
rsion 2, 06.0
8
.2010
Assigning phones to the user
Use
Add Phone
or
S
to view the selection of available phones. Once you have made
your selection, all the user's phone numbers are active on this device.
Primary Phone
for several assigned devices: The call manager (i.e., the phone interface on
the Gigaset T300 PRO / Gigaset T500 PRO web user interface) and the WinClient use the
primary phone to establish connections as standard.
Call Waiting Indication:
If this option is active, the user will be notified of other incoming
calls during a call. He can decide whether to take a call, hold it or call back later.
Active
: In the list of devices below, you can activate or deactivate the individual phone
numbers for each phone. This means that, for example, one phone is only available for
internal calls and a second for external calls. This restricted activation is denoted by
N
.
The first registered user "owns" the phone, i.e., his number is indicated on outgoing calls,
the call will be assigned to him. If the user would like to listen to voicemails, he must be
logged on to the corresponding phone. See also
Please note
A configured telephone is only activated when it is assigned to a user.
Please note
The user can make/edit this setting himself in his preferences.
Please note
By activating the
Call Waiting Indication
function, redirections will not occur when
the line is busy!
Important
The device name
IAX2/
... denotes a Gigaset T300 PRO / Gigaset T500 PRO phone plug-
in. This must be activated by each user, even if the setting here is active
M
. 'Active'
refers solely to the use of the selected phone numbers on this particular phone.
Please note
If a user logs off from the phone using
M
N
+ login ID, it is no longer assigned to
him unless he logs back in again with
M
M
+ login ID or an administrator assigns
him the phone in Gigaset T300 PRO / Gigaset T500 PRO.
