Te
mplat
e
M
odu
le
, V
e
rs
ion 2.
1,
1
1
.08.
20
20
/
Te
mpl
a
te Basiseinstellu
ngen:
V
e
rsio
n 3.
1
-
0
7
.0
7
.20
20
Handset
Gigaset N870 IP PRO / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / starting_Einstein.fm / 1/7/21
10
Charge the battery
Charge the battery fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The battery is fully charged when the power icon
disappears from the display.
As soon as power is applied to the handset, a Setup wizard starts.
Setting the display language
Press the control key
until the language required is selected
on the display, e.g.
English
press the display key
OK
You can also change the display language later on in the
Settings
menu.
Registering a handset
Register the handset with the Gigaset N870 IP PRO.
On the Gigaset N870 IP PRO
Start the registration process
Information for this:
User guide "N870 IP PRO - Installation, configuration and operation"
or: Contact the administrator of the DECT network.
On the handset
You require the 4-digit system PIN (registration code) generated on the Gigaset N870 IP PRO.
If the handset is not yet registered with a base:
Register
. . . A search is performed for a base ready for registration
Enter the system
PIN
OK
If the handset is already registered with a base:
. . . Use
to select
Settings
OK
Registration
OK
Register
Handset
OK
. . . A search is performed for a base ready for registration
Enter the
system PIN
OK
Once registration is complete, the handset returns to idle mode. Shown on the idle display is the
name set on the Gigaset N870 IP PRO for the handset (user name or display name). If it is not,
repeat the procedure.
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Registration must be initiated
both
on the Gigaset N870 IP PRO
and
on the handset.
For this, the handset must be within range of the Gigaset N870 IP PRO.
2,5h
Deutsch
English
Francais
