background image

69

Base settings

Gigaset SL780/SL785 / AUS Neuseeland / A31008-M2009-C401-3-7619 / registr_sett.fm / 29.11.2010

V

e

rsion 4, 16.0

9

.2005

Base settings

The base settings are carried out using a reg-
istered Gigaset SL78H handset.

Protecting against 
unauthorised access

Protect the system settings of the base with 
a PIN known only to you. The system PIN 
must be entered when, for example, regis-
tering/deregistering a handset to/from the 
base or when restoring the default settings.

Changing the system PIN

You can change the 4-digit system PIN set on 
the base (default setting: 

0000

) to a 4-digit 

PIN known only by you.

Gigaset SL785: Setting a system PIN facili-
tates remote operation of the answering 
machine 

¢

page 50. 

v

 

¢

Ï

 

¢

System 

¢

System PIN

~

Enter the current system PIN 
and press 

§OK§

.

~

Enter your new system PIN and 
press 

§OK§

.

Resetting the system PIN

If you have forgotten your system PIN you 
can reset the base to the original code 

0000

:

Disconnect the power cord from the base. 
Hold down the registration/paging key on 
the base while reconnecting the power 
cable to the base. Release the key after a 
while. 

The base has now been reset and the system 
PIN 

0000

 set.

Activating/deactivating 
music on hold

v

 

¢

Ï

 

¢

Audio Settings

 

¢

Music on hold

Press 

§Change§

 to activate or deactivate the 

music on hold (

³

 = on).

Repeater support

With a repeater you can increase the range 
and reception strength of your base. You will 
need to activate repeater mode. This will ter-
minate any calls that are in progress at the 
time.

Precondition:

 A repeater is registered. Eco 

mode is deactivated.

v

 

¢

Ï

 

¢

System 

¢

Repeater Mode

Press 

§Change§

 to deactivate repeater mode 

(

³

= on).

Restoring the base to the 
factory settings

When the settings are restored

u

date and time will be retained 

u

handsets are still registered 

u

the system PIN is not reset 

v

 

¢

Ï

 

¢

Reset 

¢

Base Reset

~

Enter the system PIN and press 

§OK§

.

§Yes§

Press the display key.

Please note

All handsets are deregistered and must 
be re-registered. All settings are restored 
to the factory settings.

Please note

Repeater support and eco mode 
(

¢

page 53) cancel each other out, i.e. 

both functions cannot be used at the 
same time.

Содержание SL780




























































































Отзывы: