13
Gigaset SL450A GO / LUG IE-UK en / A31008-M2721-L101-1-7619 / starting_GO.fm / 7/16/15
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Handset
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
.
¤
Press the keys
and
slowly
and successively . . . the
language settings display appears, the set language
(e. g.
English
) is highlighted (
= selected).
¤
To select a different language: Press the control key
until
the desired language is highlighted on the display,
e. g.
Francais
press the key on the right directly underneath the display to activate the
language.
¤
To revert to idle status: Press and
hold
the End call key
Connecting the headset
¤
Connect the headset with 2.5 mm jack to the left side of the
handset .
For information on recommended headsets, see the relevant product
page at www.gigaset.com/sl450.
The headset volume corresponds with the setting for the receiver
volume (
p. 89).
Connecting the USB data cable
For data exchange between the handset and PC:
¤
Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset
.
Connect the handset
directly
to the PC,
not
via a
USB hub.
Deutsch
English
Francais
1
1
1
1