65
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Assigning static IP addresses to individual PCs
Even if you have activated the DHCP server you can still assign a static IP address to indi-
vidual PCs (e.g. when setting up these PCs for NAT functions).
ì
Enter the
MAC address
and the name of the PC in the
Device name
field.
ì
Enter the
IP address
you wish to assign to the PC in the field below.
ì
Click
Add
to add the entry to the list.
ì
Click
Delete
to delete the entry from the list.
ì
Click
OK
to apply the settings.
Configuration for wireless connections
If PCs communicate wirelessly via the Gigaset SE366 WLAN, you should take steps to
enhance the security of your wireless network. You make this configuration via the
Advanced Settings
–
Wireless Network
menu. Here you can
u
activate the Gigaset SE366 WLAN's wireless module (see below),
u
set the channel and
u
activate and configure WPS (see page 68),
u
set
for wireless traffic (see page 69),
u
restrict access to the Gigaset SE366 WLAN's LAN (see page 74),
u
configure the Gigaset SE366 WLAN's repeater function (see page 75).
ì
In the
Advanced Settings
menu, select
Wireless Network
.
