64
Connecting the base to the PABX
Gigaset S910-S910A / China WDCT EN / A31008-M2306-Y101-1-7619 / pabx.fm / 10.09.2012
V
e
rsion 4.1, 21
.11.2007
Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Dialling mode and Flash
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (PD).
v
¢
*#Q5#
¢
§OK§
Pulse dialling mode (DP).
Or:
¢
Q
§OK§
Tone dialling (DTMF).
Setting recall
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
v
¢
*#Q5#
2
~
Enter digits for the recall time
and press
§OK§
.
0
= 80 ms;
1
= 100 ms;
2
= 120 ms;
3
= 400 ms;
4
= 250 ms;
5
= 300 ms;
6
= 600 ms;
7
= 800 ms
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key
c
and sending the number.
v
¢
*#Q5#
O
~
Enter number for the length of
the pause (
1
= 1 sec.;
2
= 3 secs.;
3
= 7 secs.) and press
§OK§
.
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
¢
*#Q5#
4
~
Enter a digit for the length of the
pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms) and press
§OK§
.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite:
You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automat-
ically reactivated.
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is only used for a few old
PABXs.