25
Making calls with VoIP and the fixed line network
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / telephony.fm / 27.10.08
Ve
rsion 4, 16.09.2005
Entering an IP address
You can also dial an IP address instead of a
phone number using VoIP.
¤
Press the star key
to separate the
sections of the IP address
(e.g. 149*246*122*28).
¤
If necessary press the hash
key to
attach the SIP port number of the per-
son you are calling to the IP address
(e.g. 149*246*122*28#5060).
You
cannot
dial IP addresses using a line
suffix.
Cancelling the dialling operation
You can cancel the dialling operation with
the end call key
.
Dialling emergency numbers –
defining dialling plans
You can use the Web configurator to block
certain numbers or to define which of
your numbers (fixed line network, VoIP)
should be used to call specific numbers
(
Dialling Plans
If you enter a number that has a defined
dialling plan, the call will be made via the
line defined in the dialling plan – regard-
less of whether the talk key is pressed
briefly or pressed and held. Any automatic
area code will
not
be prefixed to the
number.
Emergency numbers
Dialling plans for emergency numbers
(e.g. the
local
emergency service
number) are factory-set for certain coun-
tries. Emergency calls are then always
made via the fixed line network.
You cannot delete or deactivate these dial-
ling plans. However, you can change the
connection through which each emer-
gency number should be called (e.g. if the
phone is not connected to the fixed line
network). You must make sure that the
VoIP provider for the selected connection
supports emergency calls.
If your phone does not have default dial-
ling plans for emergency calls, you should
define the rules yourself (page 110).
Assign them to a connection that you
know supports emergency calls. Emer-
gency calls are always supported by fixed
line networks.
Please note:
If no rules are defined for
emergency numbers and you have pro-
grammed an automatic local area code
(page 109), the code will be prefixed to
emergency numbers as soon as they are
dialled via a VoIP connection.
Ending a call
Press the end call key.
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree key
.
You can accept the call by:
¤
Pressing the talk key
.
¤
Pressing the handsfree key
.
¤
Pressing the display key
Ÿ
to for-
ward the call to the answer machine
If the handset is in the charging cradle and
the
Auto Answer
function is activated
(page 80), the handset will take a call
automatically when you lift it out of the
cradle.
Please note:
Emergency numbers cannot be dialled if the
keypad lock is activated. Before dialling, press
and hold
the hash key
, to release the
keypad lock.
Please note:
Only calls to receive numbers assigned to your
handset will be signalled (page 106).
Calls made to a number that is not assigned to
a handset as a receive number will not be sig-
nalled on any handset.
