14
First steps
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / starting.fm / 27.10.08
Ve
rsion 4, 16.09.2005
1. Connect the phone cord and power
lead to the base station
1. Insert the phone cord into the lower
connection socket at the rear of the
base station.
2. Insert the power lead of the mains
adapter into the upper connection
socket at the rear of the base station.
3. Push both cables into the appropriate
cable channels.
2. Connect the base station to the fixed
line network and the mains power
supply
1. Insert the phone cord into the fixed line
network connection socket.
2.
Then
insert the mains adapter into the
mains socket.
Please note:
u
Keep the mains adapter
plugged in at
all times
for operation, as the phone
does not work without mains connec-
tion.
u
Only use the mains adapter and phone
cord
supplied
.
u
If you buy a replacement phone cord
from a retailer, pay attention to the wir-
ing of the phone jack.
You can now use your phone to make calls
via the fixed line network and can be
reached on your fixed line number.
Your answer machine is set with a default
announcement in answer and record mode
(page 52).
3. Connect the base station to the
router (Internet)
For Internet access you need a router con-
nected to the Internet via a modem (this
may be integrated in the router).
1. Connect an Ethernet cable plug into
the LAN socket at the side of the base
station.
2. Then insert the second Ethernet cable
plug into a LAN socket on the router.
1
2
3
2
1
Correct phone jack assignment
1 unused
2 unused
3 a
4 b
5 unused
6 unused
3
2
1
4
5
6
1
2
