102
Web configurator –configuring phone via PC
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / web_server.fm / 27.10.08
Outbound proxy mode
Specify when the outbound proxy
should be used.
Always
All signalling and voice data sent by the
phone is sent to the outbound proxy.
Auto
Data sent by the phone is only sent to
the outbound proxy when the phone is
connected to a router with symmetric
NAT or blocking firewall. If the phone is
behind an asymmetric NAT, the STUN
server is used.
If you have set
STUN enabled
=
No
or
have not entered a STUN server, the
outbound proxy is always used.
Never
The outbound proxy is not used.
If no server is entered in the
Outbound
proxy
field, the phone does not respond
to the selected mode and operates as
though
Never
is selected.
Outbound proxy
The (fully-qualified) DNS name or the IP
address of the provider's outbound
proxy is displayed.
Outbound proxy port
The number of the communication
port used by the outbound proxy is
displayed.
Saving settings on the phone
¤
Click
Set
to save the changes.
The
Connections
list will be shown after
saving (see Figure 3 on page 98).
If you want to reject the changes that have
been made, click
Cancel
.
Clicking the
Delete
button will reset all the
values back to their default settings. Fields
with default settings are empty.
Please note:
If you do not make any
entries for a lengthy period, the connec-
tion to the Web configurator is automati-
cally terminated. Unsaved entries are lost.
If necessary, implement temporary secu-
rity measures. You can subsequently con-
tinue the entry and make changes if nec-
essary.
Activating a new connection
If you have configured a new VoIP connec-
tion, you must also activate it.
In the
Connections list
:
¤
Activate the relevant option in the
Active
column ( = activated).
Your phone will register itself with the
VoIP provider using the relevant access
data. Update the Web page (e.g. by press-
ing F5). The
Status
Registered
column will
appear if registration was successful. You
can now be reached on this VoIP phone
number.
Configuring the fixed line connection
You can assign a name to your fixed line
connection. This name is used to display
the connection on the handset and the
Web configurator interface, e.g. during
allocation of send and receive numbers
(page 106), for the call display (page 26).
¤
Open the following Web page:
Settings
¢
Telephony
¢
Connections
.
¤
In the
Fixed Line Connection
area, click
the
Edit
button.
¤
Enter your fixed line network number
or the name of your choice (max. 16
characters) for your fixed line connec-
tion in the
Connection Name or Number
field. The default is "
Fixed Line
".
Please note:
Once the new entry has been made, the VoIP
phone number is assigned to each handset
and also the integrated answer machine as a
receive number. For how to adjust the assign-
ment, see page 106.