Gigaset S450 Скачать руководство пользователя страница 9

Страница: 9 / 49

First Steps

Gigaset S455 / USA EN / A31008-M1714-B101-1-19 / starting.fm / 28.3.06

Insert your hand into the headset

socket cavity and pull the battery cover

upwards.

Placing the handset in the base station

and registering

Place the handset in the base with its

display facing outwards

The handset registers automatically. Reg-

istration takes around 1 minute. During

this time

Regstr.Procedure

appears in the

display and the name of the base station

flashes, e.g.

Base 1

. The handset will be

assigned the lowest unassigned internal

intercom number (1–6).
This will appear in the display when regis-

tration is complete, for example

INT 1

. This

means that the number 1 has been

assigned. If the internal numbers 1–6 are

already assigned to other units, the

number 6 is overwritten.

To charge the batteries, leave the handset

in the base station.

For questions and problems see page 35.

Headset socket

Most headsets with standard 2.5mm mini

plugs are compatible with this handset.

Initial charging and discharging of

batteries

If the handset is activated, the flashing

battery icon

in the top right of the dis-

play indicates that the batteries are being

charged.
During handset operation, the battery

icon indicates the charge status of the bat-

teries (page 3). The correct charge level

can only be displayed if the batteries are

first fully charged

and

discharged.

To do this, leave the handset in the

base or charging cradle

continuously

for

ten

hours. Your handset need not

be switched on for it to charge.

Afterwards, remove the handset from

the base station and do not put it back

again until the batteries are fully dis-

charged.

Please remember:

Always repeat the charging and dis-

charging procedure if you remove the

batteries from the handset and re-

insert them.

The batteries may feel warm as they are

charging. This is normal.

Notes:

– Automatic registration is only possible if

no-one is making calls using the base sta-

tion.

– Each key press interrupts the automatic

registration.

– If automatic registration does not work the

handset will need to be registered manually

(page 21).

– You can change the name of the handset

(page 24).

Notes:

– If the handset has switched itself off

because the batteries have no charge and is

then placed in the base station, it will

switch itself on automatically.

– Only place the handset in the base or

charging cradle that is intended for it.

Note:

After the first battery charge

and

discharge

you may replace your handset in its base after

every call.

S450

Содержание S450


















































Результаты поиска

Содержание S450

Отзывы:

Похожие инструкции для S450

Бренды по названию

Популярные бренды

Gigaset S450, Руководство пользователя

Результаты поиска

Содержание S450

Отзывы:

Похожие инструкции для S450

Бренды по названию

Популярные бренды