Field
Description
Possible values:
•
: MPP encryption is not used.
•
"
(default value): MPP encryption V2 with 128 bit is
used to RFC 3078.
•
"8! 1
: MPP encryption V2 with 128 bit is
used as compatible with Microsoft and Cisco.
Compression
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. If encryption is set, the
remote terminal must also support it, otherwise a connection
cannot be set up.
Possible values:
•
(default value): Encryption is not used.
•
3)
•
$3'3)
•
$66
: Microsoft Point-to-Point Compression
LCP Alive Check
Select whether the availability of the remote terminal is to be
checked by sending LCP echo requests or replies. This is re-
commended for leased lines, PPTP and L2TP connections.
The function is enabled with
"
.
The function is enabled by default.
Fields in the IP Options menu
Field
Description
OSPF Mode
Select whether and how routes are propagated via the inter-
face and/or OSPF protocol packets are to be sent.
Possible values:
•
6!!4
(default value): OSPF is not activated for this inter-
face, i.e. no routes are propagated or OSPF protocol packets
sent over this interface. Networks reachable over this inter-
face are, however, included when calculating the routing in-
formation and propagated over active interfaces.
•
4
: OSPF is activated for this interface, i.e. routes are
Gigaset Communications GmbH
13 VPN
hybird 120 Gigaset Edition
295
