50
Making calls using network services
Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / netservices.fm / 16.07.13
V
e
rsion 4, 16.0
9
.2005
Activating/deactivating call waiting for external calls
If the function is activated, during an
external
call you will hear a call waiting tone
to signal that another external caller is trying to get through. If you have CLIP, the
number of the waiting caller or the corresponding directory entry is shown in the
display. The caller will hear the ringing tone.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call, you are the only party assigned to this connection and this connec-
tion is not assigned to an answering machine.
Activating/deactivating call waiting
Prerequisite for calls via VoIP:
parallel VoIP connections are permitted on your tel-
ephone (default setting; setting can be changed via the Web configurator).
v
¢
Ç
Select Services
¢
Call Waiting
Status
Select
On
/
Off
to activate/deactivate call waiting.
¤
Press the display key
§Save§
.
Call waiting is activated/deactivated for all connections to the telephone and all
registered handsets.
To activate/deactivate the function for the fixed line connection, the phone estab-
lishes a connection to the exchange to send the relevant code.
¤
After confirmation from the fixed line, press the end call key
a
.
Activating/deactivating call transfer – ECT (Explicit Call Transfer –
VoIP)
If the
Transfer (ECT)
function is activated, you can connect two external callers on
a VoIP connection with each other by pressing the end call key
a
This assumes that you are making an external call via one of your VoIP connections
and start an external consultation call.
You can activate/deactivate this function via your handset.
v
¢
Ç
Select Services
Transfer (ECT)
Select and press
§OK§
(
³
= on).
Please note
You can use the Web configurator to make further settings for the call transfer
on a VoIP connection
.
