34
Function keys
Maxwell 10 / en / A31008-N4001-R102-1-20 / web_configurator.fm / 22.01.2014
Te
mplat
e
A4, V
e
rsion 1, 0
3.04.2012
Park + Orbit
This function key is used to "park" a call. The participant hears the hold music. This function key
allows you to transfer calls within a group, which share a common line. It will be configured on all
extensions for the group. The "Park + Orbit" keys on all extensions flash if a call has been "parked"
on an extension. The call can be picked up on any extension by pressing the key.
This function is only available if your telephone is connected to a Gigaset phone system and the
number has been assigned to a group. The function key can also be assigned using the phone sys-
tem.
¤
Select the required connection and enter the
Phone number
of the shared line.
¤
Enter a name for the key.
Speed Dial
Assigns the speed dial for a phone number to the function key.
¤
Select the required connection and enter the
Phone number
that should be selected using
this function key.
¤
Enter a name for the key.
BLF
A function key that is configured as BLF (Busy Lamp Field) indicates the status of a shared line. It
will be configured on all extensions for the group. The keys will flash on all extensions if a call
comes in and light up if the line on any extension is busy.
You can accept an incoming call if you have set the
Directed call pickup code
.
This function is only available if your telephone is connected to a Gigaset phone system and the
number has been assigned to a group. The function key can also be assigned using the phone sys-
tem.
¤
Enter the
Phone number
for the shared line.
¤
If you wish you accept calls with the key, enter the
Directed call pickup code
. For a Gigaset
phone system this code is *8.
¤
Enter a name for the key.
Call Divert
Assigns a call divert to the function key.
¤
Select the connection for which the call divert should apply and enter the
Phone number
to
which the calls should be diverted.
The call divert set up here applies to all calls. To configure different call divert rules, use the screen
Settings
¢
Telephony
¢
Call Divert
(
).
¤
Enter a name for the key.
DTMF
Assigns a number to the function key that is dialled using DTMF. This is required, for example, for
querying and controlling certain network mailboxes via digit codes or for remote operation of the
local answering machine.
¤
Enter the
Phone number
that should be dialled using DTMF signalling.
¤
Enter a name for the key.
None
Nothing assigned.
¤
Click on
Save
to accept the key assignment.
You will now be returned to the
Function Keys
screen, where you can programme more keys.
Saving settings
¤
Click on
Save
to save the settings on this screen.
