Gigaset Gigaset SX100 isdn Скачать руководство пользователя страница 67

Страница: 67 / 185

SMS (text messages)

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / sms.fm / 26.08.2003

Sending SMS as an email

You must send the text messages to the

phone number of the email service of your

active send service centre

Receiving text messages and incoming message list

Information about receiving an SMS

New SMS are signalled by a message in the display, by flashing of the message key

and by a confirmation tone for all handsets with the same incoming MSN. The date and

time (transferred from the SMS centre) are indicated for each SMS received.
In the incoming message list only those SMS are listed which were sent to an incoming

MSN and are assigned to your handset. If there were not any MSNs set up, then all SMS

received are displayed on all handsets.
In the receiving list the new (unread) messages are before the old messages. New and

old messages are sorted according to their time of arrival: oldest new message,...,

newest message, oldest old message,..., newest old message.
Linked text messages are displayed as

one

SMS. If an incoming linked message is too

long or has not transferred completely, it will be split into individual messages and

stored in the incoming message list.

Opening the incoming message list

The

incoming message list

shows you:

◆

All received messages,

◆

Messages that could not be sent despite several attempts. These messages are all

stored with an error status (page 73).

An example of the SMS list is displayed as follows:

Enter the number of the email service.

Press the display key to open the menu.

Send

Confirm.

Dest.call no.

6245

{

X Í

Inbox 2/ 5

Number of new text messages in the list
Number of old, read text messages in the list

Содержание Gigaset SX100 isdn


























































































































































































Результаты поиска

Содержание Gigaset SX100 isdn

Отзывы:

Похожие инструкции для Gigaset SX100 isdn

Бренды по названию

Популярные бренды

Gigaset Gigaset SX100 isdn, Инструкция по эксплуатации

Результаты поиска

Содержание Gigaset SX100 isdn

Отзывы:

Похожие инструкции для Gigaset SX100 isdn

Бренды по названию

Популярные бренды