Gigaset Gigaset SX100 isdn Скачать руководство пользователя страница 31

Страница: 31 / 185

Functions during a call

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 26.08.2003

Conference switching

Prerequisite:

You have established an enquiry call (page 27 or page 28).

There is an active connection (the one established with the enquiry call) and one on

hold (the first). In conference switching, you speak with both parties at the same time.

Two conference switchings can be made at the same time on one base.

Setting up a conference call

You are making an enquiry call. The first party is on hold.
Press the display key

CONF.

to establish conference switching.

Ending a conference call

There are many ways to end a conference call:

Forwarding an incoming call – CD (Call Deflection)

CD enables an incoming call to be forwarded to any phone number while it is ringing,

without having to answer the call.
You can pre-set a forwarding destination (page 125), dial a phone number from the

directory or enter a new number.

You can establish conference switching with

◆

two external parties or

◆

with one internal party and an external party.

either ...

You end the conference call:

Hold down (return to idle status).

or ...

You change the conference call to an enquiry call:

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

INDIV.

Press the display key to change the conference

switching to an enquiry call (page 27 or page 28).

The connection that was active right before

establishing the conference call is made active

again.

Open the menu.

Forward

Select the menu item and confirm.

The pre-set forwarding destination is dialled.

Содержание Gigaset SX100 isdn


























































































































































































Результаты поиска

Содержание Gigaset SX100 isdn

Отзывы:

Gigaset Gigaset SX100 isdn, Инструкция по эксплуатации, Страница: 31 / 185

Результаты поиска

Содержание Gigaset SX100 isdn

Отзывы: