Gigaset Gigaset SE680 WiMAX, Руководство пользователя

Страница: 35 / 62

35
Internet
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Status.fm / 11.8.09
Sc
ha
bl
on
e 20
07_
10_
19
ì
If necessary, click the Refresh button to refresh the data in the status display.
Internet
Status > Internet
The connection settings for your Gigaset SE680 WiMAX are displayed in the Internet
submenu.
ì
If necessary, click the Refresh button to refresh the data in the status display.
Firmware version Version number of the currently installed device software. You
will also need to give your provider this number.
Connection status The status of the radio connection with the WiMAX network
is displayed as follows:
u
connected = The Gigaset SE680 WiMAX has established
a radio connection with a WiMAX network. You will see
the connection duration in brackets and in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=sec-
onds).
u disconnected = The Gigaset SE680 WiMAX is trying to
establish a connection with a WiMAX network.
IP address
Subnet mask
For an existing Internet connection only:
Displays the public IP address and subnet mask via which
your Gigaset SE680 WiMAX establishes the connection with
the Internet.
MAC address For an existing Internet connection only:
The MAC address uniquely identifies a network component
within a network, in this case the public MAC address of your
Gigaset SE680 WiMAX within the WiMAX network you use.
Default gateway For an existing Internet connection only:
Displays the gateway the Gigaset SE680 WiMAX uses for con-
necting to the Internet.
DHCP server IP address of the DHCP server with which the Gigaset SE680
WiMAX is connected. While the Gigaset SE680 WiMAX has
not been assigned an IP address by the WiMAX network, the
field stays empty.
Preferred DNS server
Alternate DNS server
For an existing Internet connection only:
Displays the domain name server the Gigaset SE680 WiMAX
uses to convert names to IP addresses.
Address Translation
(NAT) Displays whether NAT mode is activated on your Gigaset
SE680 WiMAX. NAT converts the internal IP addresses of the
PCs in your network to public IP addresses. This maintains
the confidentiality of your internal IP addresses.